Superfast Titanium Epoxy Putty Stick
Superfast Titanium is an epoxy putty in a 114g stick with a special formulation to repair high temperature pipework exposed to conditions up to 280°C.
It is titanium-filled and bonds with most materials. It repairs blow holes and stripped threads. Superfast Titanium seals cracks and leaking joints in steam pipes, tanks, vessels, engines and other high temperature systems. Repairs are pressure resistant to 30 bar.
Superfast Titanium also rebuilds small areas of damage, restoring pipeline integrity by increasing the thickness of sections weakened by corrosion and other forms of attack. It can reprofile pipes by filling pitting and smoothing out difficult shapes, like edges and steps.
As well as temperature extremes, Superfast Titanium is resistant to chemicals, water and does not rust. It contains no solvents or VOC’s, is non-flammable and releases no noxious fumes. Any unused putty stays fresh for future use when saved in its original packaging.
Unlike most other suppliers of pipe repair products, Sylmasta make all their own epoxy putty sticks using the latest manufacturing technology at their production plant in the United Kingdom. This guarantees fresh product, a reliable supply chain and reduced lead times.
How to make a high temperature pipe repair with Superfast Titanium Epoxy Putty Stick
Superfast Titanium Stick comes pre-measured with the correct 1:1 ratio of resin to hardener. The user simply cuts the required amount of putty from the stick and kneads by hand.
The two contrasting colours blend into a golden brown, titaniumn colour to indicate successful mixing. Whilst Superfast Titanium Epoxy Putty is still soft, the user then pushes it into the crack or hole in the high temperature pipework.
Superfast Titanium has a work time of approximately 90 minutes before it hardens to form a solid, watertight material sealing the hole. It achieves working strength in eight hours and a full cure with maximum properties in 72 hours.
When pipe reprofiling or rebuilding damage by increasing the outer wall thickness of weakened sections, the user presses Superfast Titanium firmly onto the area requiring improvement. It cures to create a flat, smooth surface.
Once cured, Superfast Titanium can be tapped, drilled, screwed, sawed, machined, ground, filed or painted to create a seamless finish uniform with the pipe undergoing repair.
Reinforcement with SylWrap HD Pipe Repair Bandage
Sylmasta recommend reinforcing repairs made with Superfast Titanium where operational temperatures are up to 250°C by overwrapping the epoxy putty with a SylWrap HD Pipe Repair Bandage.
SylWrap HD is a water-activated composite wrap. It sets rock-hard in minutes to form an impact resistant layer of protection covering Superfast Titanium for a permanent repair.
Superfast Titanium Epoxy Putty Stick Applications
- High temperature pipe and tank repairs, including steam pipes
- Reprofiling pipes by removing step from joints and other difficult shapes
- Rebuilding exterior surfaces of pipework left weakened and degraded by corrosion, chemicals, abrasion and other forms of attack
Benefits of Superfast Titanium Epoxy Putty Stick
- Extreme temperature resistance up to 280°C
- Easy to use – cut off amount of putty required, knead by hand, apply
- Does not rust and any unused putty will stay fresh for future repairs
- Manufactured by Sylmasta in the UK, guaranteeing fresh product and a reliable supply chain
Technical Data
- Hardness, Shore D:
80 (@20°C, full cure, 24 hours),
48 (260°C, full cure, 24 hours).
- Lap Shear Tensile Strength:
1.7 MPa (on steel, cured @ 24°C for 24hrs).
5.1 MPa (on steel, cured @ 65°C for 24hrs).
- High Temp Lap Shear Tensile Strength
1.7 MPa (on steel, cured @ 24°C for 24hrs + 1hr @ 260°C).
- Compressive Strength:
80 MPa.
- Density (gm/cm3/lb/gal):
1.9, 16.5.
- Shrinkage:
<1%.
- Non-Volatile Content:
100%.
- Electrical Resistance:
30,000 megohms.
- Dielectric Strength:
300 (volts/mil).
- Upper Temperature Limit:
245°C continuous.
280°C intermittent.
- Chemical Resistance:
Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
Full TDS Downloads
Superfast Titanium Epoxy Putty Stick Case Studies
Narrowboat Engine Heat Exchanger Manifold High Temperature Hole Repair
Superfast Titanium Epoxy Putty Stick Videos
How to mix and apply an epoxy putty stick for quick and easy pipe repair
This general instructional video shows the best method to thoroughly mix and apply an epoxy putty stick.
The required amount of putty is cut from the stick. It is kneaded by constantly rolling and folding between the palms of the hands for at least four minutes.
Once the putty has turned a streak free and a uniform colour, it is ready to be applied to the pipe.
Please use the form to enquire about the price and availability of Superfast Titanium Epoxy Putty Stick
Other High Temperature Repair Products
Titanium Supergrade HT Epoxy Paste
Titanium Supergrade HT is an alloy-reinforced epoxy paste with very high compressive strength. It has a three-hour work time and is applied with a filling knife. It rebuilds large areas of weakened pipes operating at extreme temperatures up to 250°C.
Number of Repairs: Multiple
Work Time: 180 minutes
Temperature Resistance: Up to 250°C
E190 Epoxy Pipe & Tank Repair Kit
Kit containing high-strength E190 Brushable Epoxy Resin and Fibreglass Tape. When used in conjunction, they make versatile layered composite patch repairs to high temperature pipework and tanks where wrapping is not possible.
Number of Repairs: Multiple
Work Time: 30 minutes
Specialist resins can be formulated for temperature, chemical resistance, etc.